COMP Cams 3/8 Hi-Tech Pushrod - 8.275 Long 931124 Mounts the pump in approximately

Mounts the pump in approximately the same position as the factory long water pump bracket without using the exhaust bolt holes

Data logging output is included for one wire or two wire systems in both lambda or AFR

Works Where Copper/Stainless Steel Tubing Will Not

2-3/4 in Turn Down Outlet

Accepts channels from two separate user programmable CAN bus connections - works with AEMnet enabled devices and non-AEM 3rd party devices side by side

COMP Cams 3/8 Hi-Tech Pushrod - 8.275 Long 931124 Mounts the pump in approximatelyThe pushrod is one of the most important pieces of the valve train, but all too often it's taken for granted. Pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the parts in the valve train, as well as the rpm at which the engine will be run. Today's all out race engines demand the highest quality components at every step, and COMP Cams Hi Tech Pushrods fill that